0800 316 6706

Purchase Goggles and Masks  

Non vented body forms a sealed unit on the face to protect against gases as well as liquid droplets and dusts. Tough coated polycarbonate lens eliminates misting as well as protecting the wearer from flying particles. Suitable for molten metal. Conforms to EN 166.1.B 3.5.9

This range of respirators uses twin inhalation valves and a parabolic valve to reduce breathing resistance and heat build up together with bonded carbon filters which do not require granule containers and features a textured face seal for enhanced comfort. Protection against organic vapours with BP>65°C+ and good warning properties, and acid gases, plus particulates(water and oil based) Maximum use limitations: 10 x WEL or 1000ppm whichever is the lower for organic vapours, inorganic and acid gases and 20 x WEL for particulates. Conforms to EN 405:2001 FFABE1P3D

A class 1 full face mask with good protection and economy in use. Excellent field of vision. Designed for maximum comfort, cost effectiveness and protection against respiratory hazards plus eye and face protection conforming to EN 166 B. Conforms to EN 136 Class 1.
Please note: these face masks are not supplied with filters. See RXP207F, below.

To suit 3M 6000 Series Low Maintenance Class 1 Full Face Mask (RXP207L / RXP207M)

FFP2 - Suitable for protection against fine toxic dusts, fibres and aqueous mists but with additional protection against oil based mists or aerosols. The exhalation valve lessens heat build up and provides greater comfort. Conforms to EN 149:2001 Assigned Protection Factor = 10

FFP3 - Protection against very fine toxic dusts, fibres and aqueous mists. Protects against oil mists, welding fumes (not Nitrate gases) and microbiological hazards. For use in pharmaceutical, iron and steel and construction industries. Exhalation valve lessens heat build-up and provides greater comfort. Conforms to EN149:2001 Assigned Protection Factor = 20